Traditional Steel Roller Shutter Doors
Traditional Steel Roller Shutter Doors - Image 2
Shop Shutters
Traditional Steel Roller Shutter Doors - Image 4
Traditional Steel Roller Shutter Doors - Image 5
Traditional Steel Roller Shutter Doors - Image 6

‘- Available Sizes -Made to Measure
– Construction – Fully Hot Dipped 75 mm Scrolled Single Skinned Galvanised Steel Curtain.
– Options- Curtain available in either 22swg or 20swg solid or perforated.
– Used For- Securing all Types of Openings, doors, windows, shop fronts.
– Security Rating – Medium Level
– Operation – Manual or Electric (single or three phase motors available).
– Fixing -Can be Face Or Reveal Fixed
– Finish – Can be fully powder coated
– Ideally Suited for- Commercial and Industrial Applications and can span widths up to 7m

 

or
Get a Quote on This Product

Description

The QS-75T Traditional Steel Roller Shutter uses a strong 75mm Scrolled Galvanised Steel Slatted Curtain with which can also be perforated if required. The end plates are 3mm galvanised steel and the shutter head box is also fully galvanised.  An “L” or “T” bottom slat can be specified dependent on the type of installation.

The shutter can be powder coated any colour from our extensive range at an extra cost.  Spring loaded with bottom slat lock as standard with the option to upgrade to bullet locks for higher security or electrically operated using either single or three phase motors.

A safety brake will be required to prevent the shutter from suddenly descending if the power should fail (only needed on shutters over a certain size and weight)

A manual over-ride may be needed if the electric roller shutter option is used and installed over a doorway, shop entrance office foyer etc.

Additional information

info

Made to Measure